Super Duplex 2507 Pipe Fittings
ASTM A815 UNS S32750 Buttweld Fittings and Duplex 2507 Elbow manufacturer in India
Manufacturer of ASTM A815 UNS S32760 Buttweld Fittings & 2507 Duplex Reducer in Mumbai, check specification and price in India
A SDSS 2507 is a high-strength stainless steel grade. The Super Duplex 2507 Pipe Fittings are fixtures that play a pivotal role in influencing the characteristics of the flow in the system. These fittings are designed with a superior content of chromium, nickel, molybdenum, nitrogen, and constituting alloys. The content embedded in the 2507 Duplex Pipe Fittings gives them enhanced corrosion and oxidation resistance properties. These fittings have good resistance to pitting and crevice corrosion in different setups. The versatile 2507 Pipe Fittings have a 50-50 austenitic and ferritic microstructure. This gives them higher strength and superior load-bearing capacity in the system. These fittings are designed in different shapes and sizes to meet different customer requirements. The UNS S32750 Pipe Fittings are designed with a Brinell hardness of 270mpa with an elastic modulus of 210Gpa. The versatile fittings may have an edge here compared to the UNS S32760 Pipe Fittings. However, the S32760 fittings possess higher tensile, yield, and fatigue strength, allowing them to work well in aggressive chloride-containing environments and in systems where stress corrosion is high.
The ASTM A815 UNS S32750 grade is a work hardenable alloy that can be slightly magnetic in nature due to its dual microstructure. This grade is very identical to the ASTM A815 UNS S32760 apart from a few differences in its strength and load-bearing capacity. The fixtures in this grade are reliable and produced with the best raw materials and top-of-the-line technology under the guidance of our renowned technicians.
- Spec Chart of Super Duplex 2507 Pipe Fittings
- Super Duplex 2507 Fittings Price List
- Different SAF 2507 Pipe Fittings Types
- Alloy 2507 Buttweld Fittings Chemical Composition
- 2507 Super Duplex Elbow Mechanical Properties
- SDSS 2507 Pipe Fittings Equivalent Grade
- Dimensions Of UNS S32750 Pipe Fittings
- ASTM A815 UNS S32750 Elbow Weight Chart
- Pressure Rating of Alloy 2507 Buttweld Fittings
- Super Duplex 2507 Pipe Fittings Inspection and Testing
- Alloy 2507 Reducer Dimensions
- ASTM A815 UNS S32760 Fittings Application
Spec Chart of Super Duplex 2507 Pipe Fittings
| Material: | SDSS 2507 |
| ASTM Standard: | ASTM A815 UNS S32750 / ASTM A815 UNS S32760 |
| Size: | Seamless DN15 (1/2″) – DN600 (24″) Welded DN15(1/2″) – DN1200 (48″) |
| Fittings Type Manufacturer | DN15-DN1200 |
| Forming: | Mandrel Forming or Press Forming |
| Manufacturer of Following Standard: | ASME/ANSI B16.9, DIN2605/2615/2616/2617, JIS B2311/2312/2313, EN10253, MSS SP-43/75 |
| WT: | SCH5S – SCH160 |
| Bending Radius Provided By Manufacturer | Radius=1 D, 2D, 3 D, 5D, 6D, 8 D, 10D |
|---|---|
| Connection | Butt Weld End as per ASME B16.9 |
| Type: | Elbow, Tee, Reducer, Cap, Stud-Ends, Cross |
| Surface finish Provided by Manufacturer | Shot blasting, Sand blasting or Pickling surface |
| Connection | Butt Weld End as per ASME B16.9 |
| Elbows Manufacturer | Angle : 22.5 deg, 45 deg, 30deg, 90 deg, MSS SP-75 JISB2311 DIN2605 JISB2312 JISB2313, 1.0D, 180 deg, 1.5D, 3D, 2.0D, 2.5D, 4D, 5D, 6D, 7D-40D . Standard: ASME B16.28, GB, ASME B16.9, ASME B16.25, BS, ISO |
| Application | For Water, Oil and Gas Industrial |
| Test Certificates | EN 10204/3.1B Raw Materials Certificate 100% Radiography Test Report Third Party Inspection Report, etc |
| Application | For Water, Oil and Gas Industrial |
Super Duplex 2507 Fittings Price List
$ 37.48
Per Piece
SDSS CAP S32750, 8 SCH 10S
$ 22.58
Per Piece
90 DEG ELBOW 2 SCH 40 SUPER DUPLEX 2507
$ 43.42
Per Piece
EQUAL TEE 2 SCH 40 SDSS 2507
$ 74.67
Per Piece
ELBOW BW LR 90DEG 3IN-10S Alloy 2507
$ 14.33
Per Piece
45 DEG ELBOW 2 SCH 40 SAF 2507
$ 6.85
Per Piece
4inch 90 ELBOW SAF 2507 SDSS
Manufacturer of 2507 Duplex Pipe Fittings as per ASME B16.9, manufacturing UNS S32750 Tee and Stub End in custom sizes
Different SAF 2507 Pipe Fittings Types
Different SAF 2507 Pipe Fittings Types
S32750 Duplex Pipe Fittings
S32760 Fittings
ASTM A815 UNS S32750 Fittings
ASTM A815 WP-S UNS S32750 Elbow
ASTM A815 UNS S32760 Pipe Fittings
ASTM A815 WP S UNS S32760 Tee
A815 S32750 Stub End
A815 UNS S32750 End Cap
SA 815 UNS S32750 Concentric Reducer
Super Duplex 2507 Buttweld Fittings
DIN 1.4410 Long Radius Elbow
Alloy 2507 Reducing Tee
Super Duplex 2507 Eccentric Reducer
ASTM A815 UNS S32750 Short Radius Elbow
Exporter & supplier of UNS S32760 Pipe Fittings in all types such as Tee, Cap, 90/45 deg Elbow, and Reducer, check 2507 Duplex Pipe Fittings price in Mumbai
Alloy 2507 Buttweld Fittings Chemical Composition
| C | Ni | Mn | Si | N | Mo | P | Cr | S | Other |
| 0.030 | 6.00/8.00 | 1.20 | 0.80 | 0.24/0.32 | 3.0/5.0 | 0.035 | 24.0/26.0 | 0.020 | Cu:0.50 |
2507 Super Duplex Elbow Mechanical Properties
| Yield Strength (0.2%Offset) | Density | Tensile Strength | Melting Point | Elongation |
| Psi – 80000 , MPa – 550 | 7.8 g/cm3 | Psi – 116000 , MPa – 800 | 1350 °C (2460 °F) | 15 % |
SDSS 2507 Pipe Fittings Equivalent Grade
| Alloy | Werkstoff NR. | AFNOR | UNS |
| SDSS 2507 | 1.4410 | Z3 CN 25.06 Az | S32750 |
Dimensions Of UNS S32750 Pipe Fittings
| Nominal Pipe Size | Outside Diameter | 180° Returns | 90° Elbows | 45° Elbows | ||||
|---|---|---|---|---|---|---|---|---|
| (inches) | Long Radius | Long Radius | Short Radius | Long Radius | ||||
| (mm) | (inches) | Center to Center (inches) |
Back to face (inches) |
Center to Face (inches) |
Center to Face (inches) |
Center to Face (inches) |
Radius (inches) |
|
| 1/2 | 21.3 | 0.840 | 2 | 1 7/8 | 1 1/2 | – | 5/8 | |
| 3/4 | 26.7 | 1.050 | 2 1/4 | 1 11/16 | 1 1/8 | – | 7/16 | |
| 1 | 33.4 | 1.315 | 3 | 2 3/16 | 1 1/2 | 1 | 7/8 | |
| 1 1/4 | 42.2 | 1.660 | 3 3/4 | 2 3/4 | 1 7/8 | 1 1/4 | 1 | |
| 1 1/2 | 48.3 | 1.900 | 4 1/2 | 3 1/4 | 2 1/4 | 1 1/2 | 1 1/8 | 3 |
| 2 | 60.3 | 2.375 | 6 | 4 3/16 | 3 | 2 | 1 3/8 | 4 |
| 2 1/2 | 73.0 | 2.875 | 7 1/2 | 5 3/16 | 3 3/4 | 2 1/2 | 1 3/4 | 5 |
| 3 | 88.9 | 3.500 | 9 | 6 1/4 | 4 1/2 | 3 | 2 | 6 |
| 3 1/2 | 101.6 | 4.000 | 10 1/2 | 7 1/4 | 5 1/4 | 3 1/2 | 2 1/4 | 7 |
| 4 | 114.3 | 4.500 | 12 | 8 1/4 | 6 | 4 | 2 1/2 | 8 |
| 5 | 141.3 | 5.563 | 15 | 10 5/16 | 7 1/2 | 5 | 3 1/8 | 10 |
| 6 | 168.3 | 6.625 | 18 | 12 5/16 | 9 | 6 | 3 3/4 | 12 |
| 8 | 219.1 | 8.625 | 24 | 16 5/16 | 12 | 8 | 5 | 12 |
| 10 | 273.1 | 10.750 | 30 | 20 3/8 | 15 | 10 | 6 1/4 | 15 |
| 12 | 323.9 | 12.750 | 36 | 24 3/8 | 18 | 12 | 7 1/2 | 18 |
ASTM A815 UNS S32750 Elbow Weight Chart
| NPS | KG | LBS |
| 1/2 | 0.11 | 0.25 |
| 3/4 | 0.11 | 0.25 |
| 1 | 0.23 | 0.5 |
| 1¼ | 0.41 | 0.9 |
| 1½ | 0.52 | 1.15 |
| 2 | 1 | 2.2 |
| 2½ | 1.81 | 4 |
| 3 | 2.95 | 6.5 |
| 3½ | 3.79 | 8.35 |
| 4 | 6.12 | 13.5 |
| 5 | 9.98 | 22 |
| 6 | 15.88 | 35 |
| 8 | 32.21 | 71 |
| 10 | 48.53 | 107 |
| 12 | 72.57 | 160 |
| 14 | 92.99 | 205 |
| 16 | 125.19 | 276 |
| 18 | 154.22 | 340 |
| 20 | 190.51 | 420 |
| 22 | 235.87 | 520 |
| 24 | 272.16 | 600 |
| 26 | 330.67 | 729 |
| 30 | 442.25 | 975 |
| 36 | 640.47 | 1412 |
UNS S32750 Pipe Fittings manufacturer in India offer Super Duplex 2507 Eccentric/ Concentric Reducer, 45/ 90/ 180 degree Long Radius Elbow and Return Bends with MTC EN 10204 3.1
Pressure Rating of Alloy 2507 Buttweld Fittings
| Normal Size Of Pipe (inches) |
OD (inch) |
Pipe Sch | Wall Thick. (inch) |
Temperature (oF) | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 100 | 200 | 300 | 400 | 500 | 600 | 650 | 700 | 750 | ||||
| Allowable Stress (psi) | ||||||||||||
| 16700 | 16700 | 16700 | 15500 | 14400 | 13500 | 13200 | 12900 | 12600 | ||||
| 1″ | 1.315 | 40 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | 1783 | 1743 | 1703 | 1664 |
| 1.315 | 80 | 0.179 | 3061 | 3061 | 3061 | 2841 | 2640 | 2475 | 2420 | 2365 | 2310 | |
| 1.315 | 160 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | 3632 | 3552 | 3471 | 3390 | |
| 1 1/2″ | 1.900 | 40 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | 1317 | 1287 | 1258 | 1229 |
| 1.900 | 80 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | 1862 | 1821 | 1779 | 1738 | |
| 1.900 | 160 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | 2717 | 2657 | 2597 | 2536 | |
| 2″ | 2.375 | 40 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | 1108 | 1083 | 1059 | 1034 |
| 2.375 | 80 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | 1605 | 1569 | 1534 | 1498 | |
| 2.375 | 160 | 0.344 | 3283 | 3283 | 3283 | 3047 | 2831 | 2654 | 2595 | 2536 | 2477 | |
| 3″ | 3.500 | 40 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | 1052 | 1028 | 1005 | 982 |
| 3.500 | 80 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | 1491 | 1458 | 1425 | 1391 | |
| 3.500 | 160 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | 2253 | 2203 | 2153 | 2103 | |
| 4″ | 4.500 | 40 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | 891 | 871 | 851 | 831 |
| 4.500 | 80 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | 1291 | 1262 | 1233 | 1204 | |
| 4.500 | 160 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | 2111 | 2064 | 2017 | 1970 | |
| 5″ | 5.563 | 40 | 0.258 | 965 | 965 | 965 | 896 | 832 | 780 | 763 | 746 | 728 |
| 5.563 | 80 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | 1154 | 1129 | 1103 | 1077 | |
| 5.563 | 160 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | 2000 | 1955 | 1911 | 1866 | |
| 6″ | 6.625 | 40 | 0.280 | 877 | 877 | 877 | 814 | 756 | 709 | 693 | 677 | 661 |
| 6.625 | 80 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | 1115 | 1090 | 1065 | 1040 | |
| 6.625 | 160 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | 1925 | 1883 | 1840 | 1797 | |
| 8″ | 8.625 | 40 | 0.322 | 771 | 771 | 771 | 716 | 665 | 623 | 610 | 596 | 582 |
| 8.625 | 80 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | 985 | 963 | 941 | 919 | |
| 8.625 | 160 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | 1858 | 1817 | 1775 | 1734 | |
| 10″ | 10.750 | 40 | 0.365 | 699 | 699 | 699 | 649 | 603 | 565 | 553 | 540 | 528 |
| 10.750 | 80 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | 937 | 916 | 895 | 874 | |
| 10.750 | 160 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | 1850 | 1809 | 1768 | 1727 | |
Super Duplex 2507 Pipe Fittings Inspection and Testing
- Flattening Test
- Flaring Test
- Micro and Macro Test
- Hardness Test
- Chemical Analysis
- PMI Testing
- Spectro Analysis
- Pitting Resistance Test
Alloy 2507 Reducer Dimensions
| Outside Diameter |
Nominal Pipe Size |
Reducers | ||
|---|---|---|---|---|
| (inches) | (mm) | Reduced from (inches) |
Concentric & Eccentric Length (inches) |
Reduced to (inches) |
| 0.840 | 21.3 | 1/2 | 1 1/2 | 1/4 |
| 1 1/2 | 3/8 | |||
| 1.050 | 26.7 | 3/4 | 2 | 3/8 |
| 2 | 1/2 | |||
| 1.315 | 33.4 | 1 | 2 | 3/8 |
| 2 | 1/2 | |||
| 2 | 3/4 | |||
| 1.660 | 42.2 | 1 1/4 | 2 | 1/2 |
| 2 | 3/4 | |||
| 2 | 1 | |||
| 1.900 | 48.3 | 1 1/2 | 2 1/2 | 1/2 |
| 2 1/2 | 3/4 | |||
| 2 1/2 | 1 | |||
| 2 1/2 | 1 1/4 | |||
| 2.375 | 60.3 | 2 | 3 | 3/4 |
| 3 | 1 | |||
| 3 | 1 1/4 | |||
| 3 | 1 1/2 | |||
| 2.875 | 73.0 | 2 1/2 | 3 1/2 | 1 |
| 3 1/2 | 1 1/4 | |||
| 3 1/2 | 1 1/2 | |||
| 3 1/2 | 2 | |||
| 3.500 | 88.9 | 3 | 3 1/2 | 1 |
| 3 1/2 | 1 1/2 | |||
| 3 1/2 | 2 | |||
| 3 1/2 | 2 1/2 | |||
| 4.000 | 101.6 | 3 1/2 | 4 | 1 1/4 |
| 4 | 1 1/2 | |||
| 4 | 2 | |||
| 4 | 2 1/2 | |||
| 4 | 3 | |||
| 4.500 | 114.3 | 4 | 4 | 1 1/2 |
| 4 | 2 | |||
| 4 | 2 1/2 | |||
| 4 | 3 | |||
| 4 | 3 1/2 | |||
| 5.563 | 141.3 | 5 | 5 | 2 |
| 5 | 2 1/2 | |||
| 5 | 3 | |||
| 5 | 3 1/2 | |||
| 5 | 4 | |||
| 6.625 | 168.3 | 6 | 5 1/2 | 2 1/2 |
| 5 1/2 | 3 | |||
| 5 1/2 | 3 1/2 | |||
| 5 1/2 | 4 | |||
| 5 1/2 | 5 | |||
| 8.625 | 219.1 | 8 | 6 | 3 |
| 6 | 3 1/2 | |||
| 6 | 4 | |||
| 6 | 5 | |||
| 6 | 6 | |||
| 10.750 | 273.1 | 10 | 7 | 4 |
| 7 | 5 | |||
| 7 | 6 | |||
| 7 | 8 | |||
| 12.750 | 323.9 | 12 | 8 | 5 |
| 8 | 6 | |||
| 8 | 8 | |||
| 8 | 10 | |||
ASTM A815 UNS S32760 Fittings Application
- Refineries
- Oil and Gas Industry
- Power Plants
- Ship Building
- Marine Applications
- Fossil Fuel Power Plants
- Paper and Pulp
Recently Exported Duplex 2205 Flanges in Following Places
Shuaiba 3 - Saudi Arabia
Paraguana Refinery Complex - Venezuela
