A DSS 2205 grade is designed possessing 50-50 austenitic and ferritic microstructure. The Duplex 2205 Plate is manufactured in sizes above 6mm with a chemical composition of chromium, molybdenum, nickel, and nitrogen. The content embedded in these plates gives them enhanced resistance to corrosive and reducing media. A UNS S32205 plate has a higher content of nitrogen, giving them a protective layer forming a firm surface quality. These plates provide strength and stability to different fixtures. The ASTM A240 UNS S32205 is designed to work in pressurized vessel grades. The items in this grade have good strength and can process volatile media and toxic reducers. The versatile SA 240 UNS S32205 component can work well in elevated pressures and temperature applications. The grade helps reduce the impact of the shocks on the hydraulic system of the pump. The UNS S31803 Plate has good thermal strength in the region between 950 to 1150 degrees C. These plates can be readily welded following standard welding procedures. ASTM A240 UNS S31803 can be heat treated allowing them to be solution annealed at temperatures above 1040 degrees C, followed by quenching. The pressurized vessel SA 240 UNS S31803 grade has a density of 7.82 g/cm3 and has a hardness of 293 Brinell. These components have a minimum tensile strength of 621mpa with a minimum yield strength of 448mpa and can be elongated by 25% in the system.

A DSS 2205 Stainless Steel Sheet is designed in sizes below 6mm but above 0.5mm. These sheets add an aesthetical appeal to different applications. The Duplex 2205 Sheet is not preferred to provide stability to different applications. These sheets have good machining and fabricating capacity. DSS 2205 Strips are designed in sizes above 6mm and act as filler material and can be used to securely weld different piping components. Duplex 2205 Coil can be efficiently transported to different locations.